S89C1087
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Single Trial for Ignition
- 6 Second Lockout Timing
S89C1095
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Single Trial for Ignition
- 15 Second Lockout Timing
S89C1103
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Single Trial for Ignition
- 4 Second Lockout Timing
S89D1002
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Single Trial for Ignition
- Requires Separate Flame Sensor
6 Second Lockout Timing
S89G1005
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Not For Use in Atmospheric Burner Systems
- 4 Second Lockout Timing
S89G1013
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Not For Use in Atmospheric Burner Systems
- 6 Second Lockout Timing
S89G1021
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Not For Use in Atmospheric Burner Systems
- 11 Second Lockout Timing
S89H1003
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Requires Separate Flame Sensor
- Not For Use in Atmospheric Burner Systems
- 4 Second Lockout Timing
S89H1011
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Requires Separate Flame Sensor
- Not For Use in Atmospheric Burner Systems
- 6 Second Lockout Timing
S89H1029
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Requires Separate Flame Sensor
- Not For Use in Atmospheric Burner Systems
- 11 Second Lockout Timing
S890G1003
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Use in Systems with Combination Igniter-Sensor where a Prepurge
Cycle is Desired
- Includes 30 Seconds Minimum/37 Seconds Maximum Prepurge
- 4 Second Lockout Timing
S890G1011
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Use in Systems with Combination Igniter-Sensor where a Prepurge
Cycle is Desired
- Includes 30 Seconds Minimum/37 Seconds Maximum Prepurge
- 6 Second Lockout Timing
S890G1029
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Use in Systems with Combination Igniter-Sensor where a Prepurge
Cycle is Desired
- Includes 30 Seconds Minimum/37 Seconds Maximum Prepurge
- 11 Second Lockout Timing
S890H1002
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Requires Separate Flame Sensor
- Use in Systems where a Prepurge Cycle is Desired
- Includes 30 Seconds Minimum/37 Seconds Maximum Prepurge
- 4 Second Lockout Timing
S890H1010
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Requires Separate Flame Sensor
- Use in Systems where a Prepurge Cycle is Desired
- Includes 30 Seconds Minimum/37 Seconds Maximum Prepurge
- 6 Second Lockout Timing
S890H1028
- For Use In Hot Surface Ignition Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Three Trials for Ignition
- Requires Separate Flame Sensor
- Use in Systems where a Prepurge Cycle is Desired
- Includes 30 Seconds Minimum/37 Seconds Maximum Prepurge
- 11 Second Lockout Timing
S89J1008
- For Use in Hot Surface Ignitions Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Single Trial Fro Ignition
- Use In Systems with Combination Igniter-Sensor
- Provides 2 Second Maximum Ignition Activation Period.
- 6 Second Lockout Timing
S89J1016
- For Use in Hot Surface Ignitions Systems to Control Hot Surface
Igniter and Flow of Gas in Appliances.
- Provides Single Trial Fro Ignition
- Use In Syustems with Combination Igniter-Sensor
- Provides 2 Second Maximum Ignition Activation Period.
- Includes Plug for Vent Damper
- 4 Second Lockout Timing
Back to
Honeywell Control Index Page